3 stupid things that can wreck an otherwise excellent calibration

Calibration Certificate
Janice Bennett-Livingston
Industrial Manufacturing and Processes
Industrial Measurements
Life Science

This week's blog comes from our calibration and repair department:

The top three calibration issues listed below aren’t new problems, but in our experience, they are definitely issues we have to be diligent about.

  1. Not looking at the Customer requirements
  2. Transcription Errors
  3. Inadequate checks of your reference standards

Not looking at the customer’s requirements:

Unfortunately, this happens. Sometimes, if the device has built-in memory where the information exists, you can take a step back and adjust to the original calibration. But, with most instruments, once you’ve adjusted, you can’t go back. Nightmarish situation, especially if you are also failing at Stupid Thing #3.

Transcription errors:

Any manual process comes with the risk of human error. It’s easy to put the decimal in the wrong spot. There are two main safeguards: 1. Put checks in place. Look at the results carefully to see if they are realistic, and, 2. Automate processes as much as you can to eliminate data entry.

Inadequate reference standard shecks:

Obviously, reference standards drift too. The quality of your standards depends on your knowledge of the uncertainties of the device – the type of instrument, how susceptible it is to drift, your own operating environment, etc. Measurement and calibration are simply not meaningful without understanding the measurement uncertainties of your standard.


Here’s a good presentation from the government of Hong Kong’s Innovation and Technology Commission. A nice refresher course: “Evaluation of Measurement Uncertainty.” Also, a good document out of the UK: “The Expression of Uncertainty and Confidence in Measurement” from the United Kingdom Accreditation Service.
Do you have your own favorite CE that I have missed? Email us!

Vaisala´s calibration services

Standard calibration

Vaisala Standard calibration is equal to the calibration performed for new Vaisala instruments before those leave the factory. It is a perfect choice when you need to verify that the instrument accuracy matches the original specifications.
On a wall of a laboratory: Temperature and humidity data logger DL2000 – superior accuracy and stable measurement data loggers for temperature and humidity.

Accredited calibration

Accredited calibration is a right option if your instrument is used in regulated industries, used as a reference instrument or your quality standards require a calibration complying with strictest regulations.
Accredited ISO/IEC 17025 calibration by Vaisala.

Custom calibration

Custom calibration is the correct choice if specific points within your instrument’s measurement range are needed.
viewLinc with AP10 and RFL100 in a laboratory setting

Standard ISO 9001 On-site Calibration

Vaisala provides Standard ISO 9001 On-site Calibration Service for selected data loggers and instruments used in Continuous monitoring systems. The service is a convenient alternative when the system downtime is not an option. On-site calibrations are always performed by the Vaisala experts and complemented with an official certificate and documentation package.

Calibration Care Agreement

A Calibration Care agreement is the most economical and convenient way to maintain the accuracy of your Vaisala measurement instrument over its lifespan.



Janice Bennett-Livingston

Marketing Manager

In addition to editing the Vaisala Life Science blog, Janice Bennett-Livingston is the Global Life Science Marketing Manager for Vaisala's Industrial Measurements business area.

Pre-Vaisala writing credits include a monthly column called "Research Watch" for Canada's award-winning magazine alive, as well as articles in Canadian Living and other periodicals. Other past work: copywriting for DDB Canada, technical writing at Business Objects, and communications specialist for the British Columbia Child & Family Research Institute.

Add new comment