Vaisala launches a completely new probe for the measurement of hydrogen peroxide

May 29, 2017
Press Releases

Vaisala Press Release
May 29, 2017 at 8:00 a.m.

Vaisala launches a completely new probe for the measurement of hydrogen peroxide

Vaisala expands into a new area of measurement by launching the HPP272 probe for the measurement of vaporized hydrogen peroxide. The HPP272 achieves accurate and exceptionally repeatable measurements.

Hydrogen peroxide is used extensively in the bio-decontamination and sterilization of rooms, facilities, and equipment in the pharmaceutical industry and healthcare. For example, isolators, treatment rooms in hospitals, ambulances, or even aircraft can be cleansed with hydrogen peroxide. The need for more pharmaceutics and treatment facilities is growing in the world, and the need for bio-decontamination and sterilization grows at the same pace.

"The repeatability of measurements is extremely important to achieve reliable verification of the bio-decontamination process cycle after cycle," says Sanna Lehtinen, Product Manager at Vaisala.

Hydrogen peroxide is growing in popularity, as it destroys even the most resistant microorganisms, like bacterial spores, mycobacteria, and viruses at room temperature and low concentrations. It has no toxic by-products and leaves no residue.

One HPP probe can measure not only the hydrogen peroxide content (ppm) of bio-decontamination but also temperature, relative humidity (RH, only water vapor), and relative saturation (RS, whole gas mixture).

The probe uses the new PEROXCAP® sensor developed by Vaisala in the measurement of hydrogen peroxide; it is based on the company's relative humidity sensor HUMICAP®, which is known for its accuracy, repeatability, and stability, and it brings these qualities now to the measurement of hydrogen peroxide.

The reliability of PEROXCAP also depends on its intelligent measurement algorithm and heating function, which ensures water cannot condense on the sensor. This keeps measurement data reliable even in extremely high humidities.

Moreover, the sensor has a purge function that helps maintain measurement accuracy between calibrations and extends the operating life of the probe. This function heats the sensor rapidly to remove possible impurities left in the sensor's polymer films.

The HPP270 probes require calibration only once a year, and as very durable devices, they require very little maintenance.

The small probe has been made from carefully chosen materials. It is easy to install, and it does not require any special setup, such as a pump, to work.

The probes are compatible with Vaisala's Indigo200 series transmitters.

Learn more about the PEROXCAP technology and the relative saturation parameter:

Product pages:

Further information:
Sanna Lehtinen, Product Manager, Industrial Measurements, Vaisala
Tel. +358 40 832 3947
[email protected]

Marina Stenfors, Communications Manager, Vaisala
Tel. +358 50 364 4909
[email protected]

Vaisala is a global leader in environmental and industrial measurement. Building on 80 years of experience, Vaisala contributes to a better quality of life by providing a comprehensive range of innovative observation and measurement products and services for chosen weather-related and industrial markets. Headquartered in Finland, Vaisala employs approximately 1,600 professionals worldwide and is listed on the Nasdaq Helsinki stock exchange.