Data Centre World Paris is the biggest event in France dedicated to data centre experts.
Vaisala experts welcome you to booth #K20 to discuss the solution for your data center environmental monitoring.
Read more on Data Centre World Paris 2023.
You might want to have a look at this on demand webinar: Data center innovation: How to design a modular high-quality sensor solution
Or read this expert article Data Center Innovation – how measurement accuracy enables energy efficiency
Data centers are the brains of almost any company whose success depends on efficient and reliable software operations. As there is quite a bit of powerful hardware sitting in one place, data centers must be safeguarded against both external and internal environmental influences, while the buildings also require sufficient cooling.
Data centers are energy-intensive facilities, currently consuming more than 1.3% of the world's total electricity production. This energy is transformed into heat that has to be conveyed and dissipated away from the equipment racks in order to maintain the correct operating temperature. It's also important to monitor the server room temperature to keep it at an optimal level. Cooling and air conditioning is one of the most important processes in any data center. Data center cooling can be done in a variety of ways, depending on the location and the local climate.Download application note on 'How to keep data centers cool'.
Refrigerant cooling consumes a lot of energy, but its usage can be reduced by taking the climate into consideration when choosing the location for the data center. In dry climates evaporative cooling is effective at dissipating heat. In cold climates direct cooling with dry, cold air can be used. Locations near water offer the possibility to dissipate the heat into the water.
Temperature is monitored and controlled using a Computer Room Air Conditioner unit (CRAC), which performs both heating and cooling functions (though not simultaneously). For heating, the CRAC recirculates warm air from the hot aisles with cool make-up air; for cooling, incoming air is chilled to achieve the correct temperature.
In addition to temperature, monitoring and controlling humidity in the equipment room is also critical. Especially in cool climates where air-side economizers are used, the absolute water content of the air is naturally low. The relative humidity of air decreases when it is heated, meaning that it may fall below the desired level. Air that is too dry increases the risk of static electricity and requires additional humidification by means of spray or evaporative humidifiers.
Critical environments require high-performance environmental monitoring and measurements in order to operate consistently and within specifications. As data centers are expected to run 24/7 all year round, failures are not an option. In addition, even small measurement errors can increase the energy bill significantly.
Vaisala offers the widest selection of measurement devices, data loggers, and monitoring systems for use in data center facility management to monitor temperature, relative humidity, CO2, wet bulb temperature, dew point temperature, enthalpy, and weather parameters. The instruments include industrial grade and HVAC transmitters that are suitable for use in data centers.
Vaisala HUMICAP® sensors are known for their accuracy, excellent long-term stability, and negligible hysteresis. You can get high-quality instruments that measure the conditions with high accuracy - devices with 0.1°C and 1%RH accuracy are readily available.
For reliability, stability, and accuracy, Vaisala's high-quality measurement and monitoring devices are an investment that pays off in the long run,
Learn more about our sensors suitable for use in data center humidity and temperature monitoring: HMT330, HMDW110, HMT120/130, and HMW90 or contact us for more information.
Vaisala offers an extensive portfolio of measurement products, data loggers and monitoring systems for use in data center facility management to measure temperature, relative humidity, CO2, wet bulb temperature, dew point temperature, enthalpy, and weather. Vaisala has the widest selection of in-house developed and manufactured sensors and systems.
Typical applications are include museums and archives, production and warehouse facilities, data centers, laboratories, and testing environments.
The Vaisala HUMICAP® HMT120 and HMT130 transmitters are suitable for cleanrooms, museums, laboratories and data centers.
Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMDW110 is suitable for relative humidity, dew-point, enthalpy, wet-bulb temperature and temperature measurement in demanding HVAC applications
Combining industrial-grade measurements with secure and reliable wireless monitoring, Vaisala Jade Smart Cloud brings new levels of proficiency and flexibility for professionals.
The Vaisala Indigo500 series transmitters are host devices for Vaisala Indigo-compatible, stand-alone smart probes. The Indigo500 series include multi-functional Indigo520 transmitter and Indigo510 transmitter with basic features.
The high-accuracy immersion temperature transmitter TMI110 is designed for measuring cooling/heating water temperatures in HVAC automation systems.
The Vaisala HUMICAP® Humidity and Temperature Probe HMP113 is a highly accurate and cost-effective humidity probe with a plastic enclosure.
In this webinar, Michael Gantert from Munters and Anu Kätkä from Vaisala will discuss the importance of measurement accuracy to maximize energy efficiency of data centers. The webinar will cover the following topics:
If you already attended or registered for this webinar, please click here.
Otherwise, please register by filling the form.