如果在未充分凝固的混凝土上铺放地板材料，由于湿度过高，会导致霉菌生长以及粘合物分解时造成挥发性有机化合物 (VOC) 释放。另外，由于脱胶，可能造成高昂的维修成本，甚至对地板材料造成永久损坏。
维萨拉 HUMICAP® 结构湿度测量套件 SHM40 是适用于混凝土和其他结构的易用、可靠型湿度测量解决方案。该套件专为钻孔法应用而设计，其中湿度探头可保留在孔内直至达到平衡状态，从而获得稳定湿度值。
SHM40 套件包括进行 ASTM F2170 或 RBK (Swedish Rådet för Byggkompetens) 合规测量所需的一切。
相关产品
温湿度探头 HMP110
用于苛刻批量应用的 RH 精度要求 ±1.5%
微型 HMP110 的测量范围为 0 ... 100%RH; -40 ... +80°C，探头采用最新一代 HUMICAP®...
相关故事
博客
| Jul 30, 2018
Gaining In-depth Understanding of the Problem is The Key - Millennium Technology Prize Winner Tuomo Suntola interviewed
Doctor Tuomo Suntola, who this spring received the prestigious 2018 Millennium Technology Prize for his technology of atomic layer deposition...
博客
| Aug 13, 2015
Good Specsmanship: How well do you understand RH specifications?
This week we discuss best practices in relative humidity specifications. Check Device Specs + Know what to look for It's a topic close to home,...
博客
| May 19, 2015
Take a peek inside a Vaisala Cleanroom: A video tour of our Research, Development and Manufacturing Facilities
In this 3-minute video our Facility Manager Hannu dons a bunny suit and gives a tour of the facilities where Vaisala creates some of the world's...
博客
| May 14, 2015
Humidity sensors – do you know what's inside?
If you don't know, perhaps you should. If you don't know how your humidity sensor works, how can you know that you are using the right humidity...
博客
| Dec 4, 2014
How Humidity Mapping Differs from Temperature Mapping (and what about Thermocouples?)
Over the past decade, it has become more common to validate humidity as well as temperature in controlled environments in order to meet GxP...
成功案例
Continuous monitoring system brings peace of mind
“Losing the stock would be just the tip of the iceberg. It would mean a loss of R&D investment, lost client commitments, and missed business...
成功案例
Mitigating Risk in Critical Environments
Vaisala’s Life Science business is organized around mitigating risk for life science companies. We design, manufacture, and install systems for...
博客
| Apr 3, 2014
New eBook: How to Validate your Monitoring System Properly with GAMP
This week we'd like to share with you a recently published eBook describing a GAMP-based process for monitoring system software validation....
博客
| Jan 29, 2014
Determining Measurement Uncertainty, PLUS: Your Favorite Quotations
This week, we answer a question from a customer who asked how to determine measurement uncertainty when using a humidity sensor (i.e. in an...
博客
| Aug 24, 2013
Yet More On Sensor Placement: The Whole Warehouse and Nothing but the Warehouse
Recently, a colleague wrote in asking for an expert opinion regarding a temperature mapping validation for a warehouse application. In this case...
博客
| Aug 24, 2013
Instrument Tolerances: Manufacturer vs. Process
This week's blog comes from Vaisala's Calibration and Repair Service department: Using the instrument maker’s tolerance, there is often a higher...
博客
| Aug 9, 2013
3 Tips to Staying Sane During a Quality Audit
Our Vancouver calibration laboratory just underwent an audit by an accreditation body. Michael Boetzkes, our North American Calibration and...
博客
| Jun 20, 2013
The Quickest, Dirtiest Breakdown of Part 11 for Monitoring Systems EVER!
In this week's blog, Senior Regulatory Expert Paul Daniel gives a brief (very brief) overview of 21 CFR Part 11 and Annex 11. Paul has Part 11...
博客
| Apr 15, 2013
What's your Strategy for Validating an Enterprise Monitoring System?
There are many things that should be considered when selecting an enterprise system for monitoring GMP storage areas. Among these concerns are:...
博客
| Feb 28, 2013
5 Frequently Asked Questions about Temperature and Humidity Validation/Mapping
This week's blog is based on Paul Daniel's recent Application Note (see below):"Five Frequently Asked Questions on Validation/Mapping." Paul has...
博客
| Feb 14, 2013
The Devilish Details of Humidity Measurement in GxP-regulated applications
This week’s blog is about something that Vaisala does very, very well: Humidity measurement. Not to toot our own horn, but it’s a hard...