Blog

Electrification is changing the job of the grid we already have: why transformer condition matters as much as age

Technical engineer checking transformer.
JP Pouttu
JP Pouttu
Director, Power Business Line, Industrial Measurements, Vaisala
Published:
Power Generation and Transmission

Key takeaways:

  • The COP31 35-by-35 Global Electrification Pledge aims to raise electricity’s share of global final energy consumption to 35% by 2035. 
  • New transformers and transmission capacity take years to deliver, so grid operators also need to understand what existing assets can safely carry. 
  • Online monitoring gives operators better information for decisions about loading, maintenance, and replacement, based on a transformer’s condition and not only its age. 

 

COP31, the UN Climate Change Conference held in Antalya, Türkiye, in November 2026, set a clear ambition. Its 35-by-35 Global Electrification Pledge aims to increase electricity’s share of global final energy consumption to 35% by 2035, up from approximately 23% in 2026, according to the COP31 Global Electrification Initiative. The pledge also recognizes that getting there will require modern and resilient grids, along with energy storage and system flexibility.

For those of us working with power transformers, this raises a practical question.

We clearly need more grid infrastructure. But new transformers and transmission capacity take years to plan, manufacture, and build. Electricity demand, and the way we use electricity, is changing now.

So, we also need to understand what the assets already in the grid can safely do.

How is electrification changing grid load profiles?

Electrification is not only increasing electricity demand. It is also changing load profiles across the grid.

Data centers are one example, bringing large new loads. Battery energy storage systems are another, shifting between charging and discharging. Renewable generation varies with the weather, while the electrification of industry brings new kinds of demand to the power system.

These are very different applications, but from a grid perspective they have something in common: operating conditions are becoming more dynamic.

For a power transformer, that matters. Power transformers are built for long service lives, but those years are not all equal. How a transformer is loaded and operated affects how it ages. Temperature, and particularly winding hot-spot temperature, is a key factor in the aging of the insulation system. Both IEEE C57.91-2025 and IEC 60076-7:2018, the IEEE and IEC loading guides for mineral-oil-immersed transformers, link loading and temperature to insulation aging and loss of life. IEC 60076-7 also addresses how moisture and oxygen speed up aging.

Age alone does not tell us how much useful life a transformer may still have. Its operating history and current condition matter.

What does online transformer monitoring tell operators?

As operating conditions change, operators need a clearer picture of how their transformers are behaving.

Online monitoring gives operators timely information on key condition indicators, such as dissolved gases and moisture in oil, and how those indicators are changing. This provides better situational awareness than relying only on periodic measurements and allows operators to follow trends as they develop.

That gives them a better basis for decisions about loading, maintenance, and risk.

Monitoring does not make an aging transformer younger. Nor does it mean that every transformer should remain in service longer.

Sometimes the right decision will be to continue operating an asset. Sometimes it will be maintenance, repair, or replacement. What matters is that the decision rests on the asset’s actual condition.

And the more we ask of the grid we already have, the more that matters.

What does the 35-by-35 target mean for existing grid infrastructure?

The 35-by-35 ambition is about electrifying transport, buildings, and industry on a much larger scale. The COP31 Global Electrification Initiative recognizes grid infrastructure as one of the conditions for making that possible.  

Sooner or later, those global targets reach the power system.

We see them as a new data center connection, a battery energy storage system, more renewable generation, or a steel mill shifting from traditional blast-furnace steelmaking to steel production using green hydrogen and electric arc furnaces.

At that point, the question is an engineering one:  
Can the existing infrastructure carry what we are asking it to carry, safely and reliably?

The energy transition needs new grid infrastructure, and building it takes time. Meanwhile, we need to understand the infrastructure already in service and what we can safely ask of it.

A more dynamic grid requires better situational awareness. For power transformers, that means better information about the condition of each asset and how that condition is changing.

That helps operators manage risk and make sound decisions about loading, maintenance, and continued operation.

For me, that is one of the practical messages behind the electrification discussion at COP31. Targets matter, but in the end, electrification has to work in the real power system.
 

Frequently asked questions

What is the COP31 35-by-35 pledge?  

A global pledge, put forward by the COP31 Presidency, to raise electricity’s share of final energy consumption to 35% by 2035.

What affects how fast a power transformer ages?  

How it is loaded and operated. Temperature, particularly winding hot-spot temperature, is a key factor in the aging of the insulation system. IEEE C57.91-2025 and IEC 60076-7:2018 both address this. IEC 60076-7 also covers the effect of moisture and oxygen.

Does online monitoring extend transformer life?  

Monitoring does not make an aging transformer younger. It gives operators better information on its condition, so they can decide whether to continue operating, maintain, repair, or replace the asset.
 

About the author:

JP Pouttu 
Director, Power Business Line, Industrial Measurements at Vaisala 

JP Pouttu leads Vaisala’s global transformer monitoring business, which includes online dissolved gas analysis (DGA) and moisture-in-oil monitoring for power transformers. He has nearly two decades of experience in the power industry, from utility substation projects to power systems and critical power solutions. 

 

Sources

COP31: 35-by-35 Global Electrification Pledge.

COP31: Global Electrification Initiative, concept note.

IEEE C57.91-2025, IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators.  

IEC 60076-7:2018, Power transformers – Part 7: Loading guide for mineral-oil-immersed power transformers.