Überwachung von Lebensmittellagern
Überwachung von Obst- und Gemüselagern
Die Bewahrung der optimalen Lagerbedingungen für Früchte und Gemüse schützt die Pflanzen vor dem Verlust von Feuchte, vor Zerfall und Alterung.
Verwandte Produkte
Serie Indigo 200 Messwertgeber
für die intelligenten Vaisala Feuchte-, CO2- und H2O2-Sonden
Hostgeräte der Serie Vaisala Indigo 200 gehören zur Vaisala Indigo Produktfamilie und...
GM70 Portables CO₂-Messgerät
Für Stichprobenmessungen
Das portable Vaisala CARBOCAPTM Kohlendioxid-Messgerät GM70 misst die CO2-Volumenkonzentration in ppm oder %. Es ist ein...
GMP251 CO₂-Sonde
Für Messungen im Prozentbereich in Bioinkubatoren, Kühlräumen und in allen anspruchsvollen Anwendungen
Die Vaisala CARBOCAPTM Kohlendioxidsonde...
GMP252 CO₂-Sonde
Für Messungen im ppm-Bereich in Landwirtschaftsbetrieben, Kühlanlagen und anspruchsvollen HLK-Anwendungen
Die Vaisala CARBOCAPTM Kohlendioxid-Sonde...
Serie DMT340 Taupunkt- und Temperaturmesswertgeber
Für anspruchsvolle Anwendungen bei geringer Feuchte
Der kondensationsbeständige DMT340 wurde für genaue und zuverlässige Messungen in...
viewLinc Software mit Überwachungs-, Alarm- und Berichterstellungsfunktionen
Kontinuierliche Überwachung von Temperatur, Feuchte und anderen Messgrößen
viewLinc überwacht unter anderem Temperatur, relative Feuchte, CO2...
HM70 Portables Feuchte- und Temperaturmessgerät
Für anspruchsvolle Stichprobenmessungen
Das portable Vaisala HUMICAP HM70 wurde für anspruchsvolle Feuchtemessungen bei Stichprobenprüfungen...
Serie HMT360 Eigensichere Feuchte- und Temperaturmesswertgeber
Für Gefahrenbereiche
Der Vaisala HUMICAP® Feuchte- und Temperaturmesswertgeber HMT360 bietet sechs Sondentypen für unterschiedliche Anwendungen in...
HM40 Portables Feuchte- und Temperaturmessgerät
Für schnelle Kontrollen und Stichprobenmessungen
Das kompakte, portable und benutzerfreundliche Messgerät Vaisala HUMICAP® HM40 wurde für...
vLog SP
Für Trendbestimmungen und Temperatur- und Feuchteanalysen
Vaisala vLog SP ist eine leistungsstarke, nutzerfreundliche Software, die Informationen von...
DL1016/1416 Temperaturdatenlogger
Zur Überwachung weiter Temperaturbereiche
Die Vaisala Multifunktions-Temperaturdatenlogger können Temperaturen in bis zu vier Anwendungen mit einem...
Mid-Range Datenlogger für Temperatur, Feuchte und Schaltkontakte
Zum Überwachen von Temperatur, Feuchte und analogen Eingängen
Die Vaisala Mid-Range Datenlogger (MR-Logger) eignen sich insbesondere für...
Serie HMDW110 Feuchte- und Temperaturmesswertgeber
Messwertgeber mit einer Genauigkeit von ±2 % und einem Zertifikat für anspruchsvolle HLK-Anwendungen
Die VaisalaHUMICAP® Feuchte- und...
Service für kontinuierliche Überwachungssysteme
Support, Schulungen und Serviceleistungen für kontinuierliche Überwachungssysteme
Vaisala bietet ein breites Servicespektrum für sein...
Thermoelement-Datenlogger DL1700
Zur Überwachung extremer Temperaturen
Die Thermoelement-Datenlogger DL1700 bieten eine genaue Erfassung der Temperaturdaten, Fernalarme sowie...
VaiNet Drahtloser Datenlogger RFL100
Für drahtlose Temperatur- und Feuchteüberwachung
Die Datenlogger der Serie RFL nutzen die proprietäre Vaisala Drahtlostechnologie VaiNet zur...
VaiNet drahtloser Temperaturdatenlogger RFL100
zur Überwachung weiter Temperaturbereiche
Die Datenlogger der RFL-Serie nutzen die Vaisala VaiNet-Drahtlostechnologie für die Überwachung von...
VaiNet Wireless Access Point AP10
Für drahtlose Überwachung
Der VaiNet Access Point AP10 ist ein Drahtlosnetzwerk-Hardwaregerät zur Unterstützung der proprietären Vaisala...
Vaisala Temperatur- und Feuchtelogger DL2000
Zum Überwachen von Temperatur und Feuchte mit optionalem analogen Eingang
Die Vaisala DL2000 Datenlogger ermöglichen äußerst genaue und stabile...
vNet PoE-Logger-Schnittstelle (Power over Ethernet)
Zum Anschließen von Datenloggern der DL-Serie an ein Netzwerk
Die Vaisala vNet PoE-Datenlogger-Schnittstelle (Power over Ethernet) ermöglicht die...
Wi-Fi-Datenlogger HMT140
Zum Überwachen von Temperatur, relativer Feuchte, Strom, Spannung und Schaltkontakten
Der Vaisala WLAN-Datenlogger HMT140 wurde für die Überwachung...
OPC-Server
Zur Verwendung von Vaisala Datenloggern der Serie DL mit Fremdsystemen
Die Vaisala OPC-Serversoftware ermöglicht Benutzern von OPC-kompatiblen...
PTB330TS Barometrischer Transferstandard
Mobiler, batteriebetriebener Transferstandard mit Datenfunktionalität
Der barometrische Transferstandard PTB330TS kombiniert ein Digitalbarometer...
Verwandte Informationen
Blog | Nov 20th 2018
7 Data Integrity Hacks for GxP Compliance
Last week we had a webinar on data integrity giving our Senior Regulatory Expert Paul Daniel the opportunity to answer questions on data...
Blog | Oct 25th 2018
Relative Humidity – What Is It And Why Is It Important?
The basics Put simply, relative humidity (RH) is a measure of the water vapor content of air. More explicitly, it is the amount of water vapor...
Blog | Oct 24th 2018
Why Is Measuring CO2 Important?
Most of us know that CO2 is a colorless, odorless gas that’s soluble in water and often seen as the bubbles in fizzy drinks. But it’s also a...
Blog | Jul 30th 2018
Gaining In-depth Understanding of the Problem is The Key - Millennium Technology Prize Winner Tuomo Suntola interviewed
Doctor Tuomo Suntola, who this spring received the prestigious 2018 Millennium Technology Prize for his technology of atomic layer deposition...
Blog | Apr 12th 2018
Q&A New VaiNet (LoRa-based) Wireless Data Loggers
We had over 480 registrants for our webinar "VaiNet - a Wireless Technology that Rises Above the Crowd" Thank you to everyone who joined in, and...
Success Story | Jan 10th 2018
Keeping Pathogens at Bay
Global mobility for people means mobility for pathogens, too. Vaisala provides a solution to ensuring vaporized hydrogen peroxide concentration...
Blog | Nov 17th 2017
Vaisala Cleanroom, At the Origins of Reliable Sensors
Would you like to have peek inside Vaisala cleanroom? It’s one of the most secret places in Vaisala, yet you will now have a chance to have a...
Success Story | Nov 10th 2017
Maintaining Harvest Fresh Apples
Controlled Atmosphere storage requires accurate carbon dioxide measurements Controlled atmosphere (CA) storage is a widely used technique for...
Blog | Jun 29th 2017
5 Ways to Treat a Misbehaving Refrigerator
Go high-end, Tune it up, Block it off, Worst-Case Scenario, Change the Set-point In this week's blog, Paul offers some advice on problem spots...
Success Story | Jun 14th 2017
CO2 Monitoring Helps Make Defect-free Potato Chips
Carbon dioxide monitoring technology helps make defect-free chips. From farm to fryer, potatoes grown to make potato chips are sensitive to...
Blog | Apr 10th 2017
Part 11 for Process Equipment, Audit Trail Reviewing, Requirements for Bulk Chemicals, And Cal Certs Without Pass/Fail
This week we have five move post-webinar questions from the Data Integrity webinar. The questions are: Do we need to comply with Part 11 for a...
Blog | Feb 25th 2017
4 Common Questions on MKT Answered: Trending, Interpreting Reports, & Default Activation Energy
In this week's blog, Paul Daniel answers a few questions that we often receive on using mean kinetic temperature. But first - make sure you don...
Blog | Dec 17th 2016
Can you use Mean Kinetic Temperature to Account for Spikes in Accelerated Aging Chambers?
In this week's blog, Paul Daniel has a little back and forth on a question he received from a webinar attendee on using mean kinetic temperature...
Blog | Dec 06th 2016
Sensor Breakdown for Chambers Vs Room Monitoring: What Sensors are best for Your Application?
Many chamber applications are cold temperature applications and usually temperature is the only parameter monitored. Cold air cannot hold much...
Blog | Jun 15th 2016
Streamlining stability testing... Sample intervals 10 seconds Vs 10 minutes
In this week's blog, Piritta Maunu answers a question she received after her recent webinar: Stability Studies & Monitoring . But first......
Success Story | Jun 08th 2016
Monitoring CO2 in Wineries
Exposure to high levels of carbon dioxide (CO 2 ) can be dangerous to workers in wineries. Care must be taken to protect workers from over...
Blog | Apr 28th 2016
Out of Tolerance Temperatures: How long before you Decommission a Storage Area?
Dear Paul, We recently mapped a warehouse expecting it to be between 20˚C - 25 ˚C. Instead we found a number of temperature probes out of range....
Blog | Aug 28th 2015
Placing Sensors Outside the Warehouse - Is it needed? Plus: How to reduce the total number of sensors in Validation/Mapping
In this week's blog, we feature two questions our regulatory expert Piritta Maunu received on environmental qualification. Piritta describes why...
Blog | Aug 13th 2015
Good Specsmanship: How well do you understand RH specifications?
This week we discuss best practices in relative humidity specifications. Check Device Specs + Know what to look for It's a topic close to home,...
Blog | May 19th 2015
Take a peek inside a Vaisala Cleanroom: A video tour of our Research, Development and Manufacturing Facilities
In this 3-minute video our Facility Manager Hannu dons a bunny suit and gives a tour of the facilities where Vaisala creates some of the world's...
Blog | May 14th 2015
Humidity sensors – do you know what's inside?
If you don't know, perhaps you should. If you don't know how your humidity sensor works, how can you know that you are using the right humidity...
Blog | May 12th 2015
Part II - Sensor Placement Webinar Questions - Answered!
Thank you to everyone who attended our training seminars in Woburn, MA last week. Here's some feedback from an attendee: This is the second...
Blog | Dec 16th 2014
Validating Software: Do You Need Data Transfer Verification?
During one of our recent webinars, we received a question on whether or not there is a regulatory expectation to validate data transfers.Without...
Blog | Dec 12th 2014
Post-Calibration Checks in Mapping Validations: Should you perform them?
During one of our recent webinars , we received a question regarding pre-and post-calibration checks: "Will an FDA inspector expect to see pre-...
Blog | Dec 04th 2014
How Humidity Mapping Differs from Temperature Mapping (and what about Thermocouples?)
Over the past decade, it has become more common to validate humidity as well as temperature in controlled environments in order to meet GxP...
Success Story | Sep 05th 2014
+20% Increase in Production Capacity with Zero Increase in Energy Consumption - Dairy Manufacturer Valio Updated Dryer Controls
Dairy Manufacturer Valio Updated Dryer Controls Valio, solely owned by the Finnish dairy farmers, is the largest dairy company in Finland. The...
Blog | Jul 26th 2014
Can Vaisala Sensors Communicate with Two Systems?
This week Paul Daniel answers a post-seminar question about monitoring using redundant sensors and multiple systems, both Continuous Monitoring...
Blog | Jul 18th 2014
New Publication & Webinar: 5 Rules for Mapping Sensor Placement
his year Paul Daniel gave presentations on sensor placement at PDA and Interphex. Here is a recorded version of that webinar: "Modern Rules for...
Blog | Jul 12th 2014
Looking into our Cold Chain Crystal Ball: Regulations & Technology
In this week's blog, Paul Daniel looks at how regulations and technology connect in a feedback loop that can guide the evolution of industry, in...
Blog | May 27th 2014
Stability Data vs. USP 36 ...What's the safest path?
Dear Paul, Our company stores finished sterile injectable product in a controlled room-temperature warehouse. The products are manufactured to...